Direct Code Entry - GE RM24926 Manual De Instrucciones

Direct Code Entry

1. Press and hold the CODE SEARCH button
until the red indicator stays on, then release
the CODE SEARCH button.
2. Press and release the desired device
button (TV, VCR, etc.). The red indicator
blinks, then stays lit.
3. Enter the 4 digit code
from the code tables
(on separate sheet).
Note: after a valid code
entry, the red indicator
turns off. For an invalid
code, the red indicator
flashes.
4. With your device on, press ON•OFF.
If the device turns off, no further
programming is required. Note: If
some buttons do not operate your
equipment, try one of the other
codes for your brand.
Write your codes down here for easy reference later.
Type
TV
VCR
CBL
SAT
DVD
AUDIO/AUX
Type stored
TV
9
Code