Mounting The Floor Socket - OBO Bettermann UDHOME 2 G Instrucciones De Montaje

Mounting the floor socket
38 | EN
4 Mounting the floor socket
Note! The floor socket can be adjusted to a maximum height of 135 mm
(from the concrete floor to the top edge of the finished floor). If a
greater height is required, then the height extension must be used.
1. Pull up the handle clamp of the hinged cover
hinged cover
2. Remove the hinged cover
Fig. 3: Removing the mounting support
3. Slacken the fastening screws slightly and remove the heavy
current mounting support
4. Place the mounting support
1
.
1
.
5
.
5
to one side and keep it safe.
1
and open the
OBO Bettermann