Publicidad
Idiomas disponibles
Idiomas disponibles
EN Mounting instructions
Product description
EN
Figure :
Square service unit for dry-care floor coverings
on screed and for system floors, with floor cover-
ing cut-out for floor coverings of max . 15 mm
thickness . With cord outlet
in removable
1
hinged lid
for cable routing . With eight pre-
2
marked entry openings
for installation pipes
4
M20 or M25 . The frame
can be adjusted to
3
the top edge of the floor covering using four
height-adjustment supports
. The minimum
5
installation depth is 95 mm, the height adjust-
ment range +20 mm .
With mounting support for max . 2 Modul 45 in-
stallation slots
and strain relief . Up to two
6
modular data sockets (keystones) or multimedia
modules can be installed using an optionally-
available mounting support . With steel plate as
walk-on protection during mounting
and
7
mounting cover
.
8
Accessory: Strain relief (item no . 7408 650) .
23
Publicidad
