Kinderkraft UNO UP Manual De Usuario página 21

•
Height from the floor of the adult's bed for which the bedside sleeper is suitable
can be found on picture 14.
•
Information on the types of adult bed for which the bedside sleeper is suitable can
be found on picture 14.
•
User shall not use other attachment system.
•
Bedside sleepers shall never be used in an inclined position
•
To prevent a suffocation hazard from entrapment, the bedside sleeper shall be
properly secured to the adult bed using the attachment system.
•
There shall never be a gap between the lower side of the bedside sleeper and the
mattress of the adult bed.
•
Check the tightness of the attachment system before each use by pulling the
bedside sleeper in a direction away from adult bed.
•
If there is any gap between the bedside sleeper and the adult bed, DO NOT use
product.
•
Gaps should not be filled with pillows, blankets or other items.
•
DANGER! – Always completely raise the drop side when not attached to the
adult's bed
•
To avoid hazards from the child's neck being caught on the top rail on the side
that is next to the adult bed, the top rail must not be higher than the adult bed
mattress.
•
To avoid the risk of your child being strangled the attachment system to the
adult's bed shall always be kept away from and out of the crib.
1. List of baby cot components - page 3
A Main frame
C Side support of the cot's bottom
E Fastening straps
2. Mounting of the cot:
Attach the middle support (B) to the side support (C). Make sure that the metal latches are properly secured:
you should hear a "click" sound (fig. 1). Connect the obtained construction to the main frame (A) by sliding
it in on both sides until it locks in place with another characteristic "click" (fig. 2). Attach Velcro straps around
the supports on the underside and on the sides of the cot (fig. 3). Insert the mattress into the interior of the
cot, taking care to ensure that it is in the correct position. Cover the side support (C) with the cover provided
(fig. 4). Attach the loose end of the cover to the bottom of the cot with Velcro straps. (fig. 5). The cot is ready
to use (fig. 6).
B Middle support of the cot's bottom
D Mattress with removable cover
F Carrying Bag
21