Proline L3217HD Manual De Instrucciones página 38

Using the Features
Aspect Ratio
Blue Screen
First Time Installation Press ▲▼ buttons to select First Time Installation, then press
Reset
Software Update
(USB)
HDMI CEC
The available menu items are dependent on the input source being selected.
All illustration is for reference only.
Selects through Wide mode settings : Auto/4:3/16:9/ZOOM1/Zoom2/
Full Screen/Point to Point.
Enables or disables the blue screen.
OK button to set relevant options including OSD language,
country and tuning.
Press OK button to restore factory settings.
Select for software upgrades by channel.
 Upgrades the software using the broadcasting signal. If the function
is selected during the software transmission period, this function
searches for available software and downloads the software and
the "Software Update" option is highlighted.
 Press OK button to display the Software Update progress bar. This
function will start software upgrading.
The time required to download the software is determined by the
signal status. Do not turn the TV off before software update has
finished. The TV will turn on again automatically after completing the
software update.
You can operate this unit with a HDMI-connected TV. Press OK
button to enter the sub-menu: HDMI CEC/Auto Power/Device
Menu.
HDMI CEC: Use ◄► buttons to select settings On/Off.
Auto Power: When setting as On, and TV and DVD are power off,
DVD boot will wake up the TV.
Device Menu: Open the DVD menu.
36