Cleaning The Dust Container; Cleaning The Suction Opening - Medion MD 16192 Manual De Instrucciones

Your robot vacuum cleaner is easy to clean and maintain. Empty the dust container
and clean the filter after every use. Clean the suction opening as required.
• Do not use any solvents or caustic/gaseous cleaning agents to clean the
appliance's surfaces. Wipe the surface of the robot vacuum cleaner and the
charging station with a damp cloth.
• Clean the surfaces of the sensors and charging contacts with a clean, dry cloth.

8.1. Cleaning the dust container

We recommend emptying the dust container and cleaning the filter after every use.
Carry out the following steps:
A
E
Press down on the pressure point marked PUSH on the appliance cover.
A)
The cover will open.
B) Fold up the handle for the dust container and remove the dust container
from the robot vacuum cleaner.
C) Remove the HEPA filter with the HEPA filter frame.
D) Fold up the dust container lid and remove the dust filter.
E) Empty the dust container over a dustbin.
F) Rinse out the dust container with water. Rinsing is not necessary every time.
Never put the dust container in the dishwasher!
Regularly clean the dust filter and the HEPA filter with the supplied brush.
G) As soon as the dust container is dry, replace the filter. After cleaning, replace
the dust container and close the robot vacuum cleaner cover.
 Before using the appliance for the first time, please ensure that the filter in the
dust container has been inserted correctly.

8.2. Cleaning the suction opening

After a while, dirt and dust can collect around the suction opening and can reduce
the suction power. To avoid this, the suction opening should be cleaned regularly.
 Switch off the appliance.
 Remove dirt and dust from around and inside the suction opening.
150 of 158
B
F
C
G
D