SUHNER LXE 3 DH Instrucciones De Uso página 5

• The grinder operator shall wear safety
goggles or face shield at all times when the
grinder is in operation.
• If noise level exceeds 85 dB(A) at the work
station, operator must use ear protection
(plugs and/or ear mufflers).
For additional safety instructions
refer to enclosed brochure DL 39 220 01
Operation conditions and instructions
The machine can be turned on and off by
turning the lever. 1. Turn locking lever in
direction indicated by arrow , and 2. Depress
valve lever 6.
Dismantling the Handle:
Remove hexagon nut 14 and handle
extension 13 or reposition handle in direction
required.
Grinding
• Observe even material removal, avoid
chattering.
• Do not treat any material containing
asbestos.
Change of tools/abrasives
• Disconnect air supply before changing tools/
abrasives
• Hold elastic bearing 18 with spanner 11,
loosen parts 19,20 by nad or pull off.
• Check concentricity, use only vibration free
tools and always observe M.OS. (Max.
operating speed). Observe mounting
instructions for Mounted Stones!
Maintenance
• Store tool in a clean, dry place.
Check the idling speed from time to time.
• Even if the tool still gives satisfactory service,
have it checked by a trained mechanic after
300 to 400 operation hours, or at least once a
year. Disassembly motor, clean and replace if
necessary the four vanes.
Also check/replace grease in the gear head 2.
• Warranty claims can only be considered, if
tool is returned complete.
Accessories:
All accessories can be found in theSUHNER®
Abrasive Power Tool catalog.
Subject to change.