NEC MultiSync LCD4010 Manual Del Usuario página 29

IMAGE FLIP
SCAN MODE
*:INPUT DVD/HD, VIDEO only
SCAN CONVERSION
FILM MODE
*:INPUT DVD/HD, VIDEO only
MONITOR ID
IR CONTROL
TILE MATRIX
01_English
IMAGE FLIP
ADVANCED OPTION
S-VIDEO MODE
NORMAL
BLACK LEVEL EXPANSION
H MIRROR
GAMMA SELECTION
V MIRROR
IMAGE FLIP
ROTATE
SCAN MODE
SCAN CONVERSION
FILM MODE
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
S-VIDEO MODE
SCAN MODE
BLACK LEVEL EXPANSION
GAMMA SELECTION
IMAGE FLIP
SCAN MODE
SCAN CONVERSION
FILM MODE
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
S-VIDEO MODE
SCAN CONVERSION
BLACK LEVEL EXPANSION
GAMMA SELECTION
IMAGE FLIP
PROGRESSIVE
SCAN MODE
SCAN CONVERSION
FILM MODE
:SEL :NEXT :RETURN :EXIT MENU
SET EXIT MENU
ADVANCED OPTION
S-VIDEO MODE FILM MODE
BLACK LEVEL EXPANSION
GAMMA SELECTION
IMAGE FLIP
SCAN MODE
SCAN CONVERSION
FILM MODE
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
MONITOR ID
MONITOR ID
IR CONTROL
TILE MATRIX
HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET + -: SEL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION IR CONTROL
NORMAL
MONITOR ID
PRIMARY
IR CONTROL
SECONDARY
TILE MATRIX
HEAT STATUS LOCK
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
TILE MATRIX
ADVANCED OPTION
H MONITORS
MONITOR ID
V MONITORS
IR CONTROL
TILE MATRIX
POSITION
HEAT STATUS
TILE COMP
POWER ON DELAY
ENABLE
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU + -: ADJ
25
Selects the image flipping or rotation.
NORMAL: Normal display.
H MIRROR: Mirror image for horizontal direction.
V MIRROR: Mirror image for vertical direction.
:SEL EXIT :RETURN MENU :EXIT MENU
ROTATE: Rotate the image 180 degrees.
Changes the display area of the image.
OVERSCAN / UNDERSCAN OVERSCAN: Set to display area about 95%
UNDERSCAN: Set to display area about 100%
+ -: SEL EXIT :RETURN MENU :EXIT MENU
Selects IP (Interlace to Progressive) converter function.
PROGRESSIVE: Enable the IP function, to convert
interlace signal to progressive. Normally use this setting.
/ INTERLACE
INTERLACE: Disable the IP function.
+ -: SEL
EXIT :RETURN MENU :EXIT MENU
NOTE: This mode is better suited for motional pictures,
but it is in danger of image retention.
Selects Film mode function.
AUTO: Enable the Film mode function. This mode is
better suited for movies, which is converted 24 Frames/
AUTO / OFF
sec source to DVD Video. We recommend to select
"PROGRESSIVE" in "SCAN CONVERSION".
+ -: SEL EXIT :RETURN MENU :EXIT MENU
OFF: Disable the Film mode function. This mode is
better suited for Broadcasting or VCR source.
Set the Monitor ID number to control the daisy chained
multiple MultiSync LCD4010s / MultiSync LCD4610s
with RS-232C.
ID No. 1
EXIT :RETURN MENU :EXIT MENU
The Monitor ID number is selectable between 1 and 26.
Selects the infrared wireless remote controller mode
with using the RS-232C daisy chain.
The item in this menu will become effective by pressing
"SET" button on the selected item.
NORMAL: The monitor will be controlled normally by
wireless remote controller.
PRIMARY: Set "PRIMARY" at the head of the daisy
chained monitors by RS-232C.
SECONDARY: Set "SECONDARY" after 2nd daisy
SET :SET EXIT :RETURN MENU :EXIT MENU
chained monitor.
LOCK: Disable the monitor control by infrared wireless
remote controller.
Keep pressing "DISPLAY" button during 5 sec or more,
this setting will return to "NORMAL".
Tile Matrix demonstrates multiple screens. This feature
provides a single large screen using up to 25 monitors.
It will be able to divide up to 5 each H and V.
This requires you to feed the PC output into each of the
monitors through a distributor.
Do not use LCD4010 and LCD4610 together for
TILE MATRIX.
1
H MONITORS: Select number of horizontal divide.
1
1
V MONITORS: Select number of vertical divide.
YES / NO
YES / NO
POSITION: Select a position to expand the screen.
:SEL EXIT :RETURN
MENU :EXIT MENU
TILE COMP: Works in tandem with Tile Matrix to
compensate for the width of the tile bezels in order to
accurately display the image.
ENABLE: Select "YES", the monitor will expand the
selected position.
PIP, POP, SIDE by SIDE and STILL and "DYNAMIC"
ZOOM mode will be disabled when "TILE MATRIX" is
activated.
English-25
08/09/2005, 16:26