GE my TOUCH SMART Instrucciones De Uso

In-Wall
Digital Timer
Fast, easy setup!
1. After installation
For first use, press the reset button ( ) below the
arrow buttons using a toothpick or pencil.
2. Set the time
Use up ( ) and
down ( ) arrows
to set current time.
3. Choose your
custom on/off times
Press "my on time," then
use up ( ) and down (
arrows to set on time.
Press "my off time," then
use up ( ) and down (
arrows to set off time. If the
blue LED is on the program
is set. If the LED is off the
program will not operate.
Repeat for each additional
"my on"/"my off" button.
All programmed times will
run simultaneously in a
24 hour day.
MADE IN CHINA
GE is trademark of General Electric Company and is under license by
Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 1-year limited warranty.
Visit www.jascoproducts.com for warranty details product registration.
Questions? Contact us at 1-800-654-8483 between 7:30AM–5:00PM CST.
r
)
)
4. Manual/Override
Press and buttons to
manually control your lights.
Note: When daylight savings time occurs use the down
( ) and up ( ) arrows to adjust the time by 1 hour.
WARNING
RISK OF ELECTRIC SHOCK
• S HUT OFF POWER AT FUSE BOX OR CIRCUIT
BREAKER BEFORE INSTALLATION
• D O NOT USE IN WET LOCATIONS
• U SE INDOORS ONLY
RISK OF FIRE
• DO NOT USE TO CONTROL APPLIANCES THAT
CONTAIN HEATING ELEMENTS (COOKING
APPLIANCES, HEATERS, IRONS, ETC.)
• D O NOT EXCEED ELECTRICAL RATINGS
• U SE COPPER WIRE ONLY WITH THIS DEVICE
• D O NOT USE TO CONTROL RECEPTACLES
Specifications:
120VAC 60 Hz
15A General/Resistive
1200W Tungsten
1200VA Ballast
1/2 HP
Works with dimmable
LED and CFL bulbs.
26893 VERSION 01 4/29/15