Orbegozo TWM 1015 Manual De Instrucciones página 10

TWM 1015
PARTS NAME
Base
HOW TO USE
Control panel
Connect the machine to the power supply.
l
Open the top panel and press the"ON/OFF"button for fan ON. Press again for fan OFF.
l
Select Low, Medium, and High speed settings by pressing "SPEED"button.
l
Select Wind type setting be pressing "MODE"button:
l
Press "OSC" button to turn on the oscillation function. Press again to turn off.
l
Press "TIMER"button , each time this button is pressed, the timer goes up by 1hrs, 2hrs and 4hrs
l
increments up to 12 hrs.
Press "ION" button to start the ionizer function, Press again to turn off.
l
The fan must be placed on a flat area. Either the fan could fall, carrying damaged or injuries.
l
When you disconnect the plug from the current collector, seize the plug and then pull it out. Do not pull
l
out the cord because this could damage it.
You must be sure that fan will not meet any obstruction when oscillating. The thing causing the
l
obstruction could be damaged if it happens.
Control panel
Front cover
Wind wheel Enter wind window
Handle
Back
cover
Power cord
Remote control
WARNING!
10