Shark EP037 Manual Del Usuario página 9

FAMILIARISEZ-VOUS AVEC VOTRE ASPIRATEUR
PORTATIF SHARK
Écrans à
débris
1. Bouton de relâche de la coupelle
2. Bouton d'alimentation On/Off
3. Poignée
4. Dispositif de surveillance du
filtre Intelli-Sense MC
5. Coupelle à poussière (réservoir)
6. Trappe de succion
7. Bandoulière
*Avertissement : Les illustrations peuvent différer de l'appareil lui-même.
Spécifications Techniques
Tension: 120 V, 60 Hz
Intensité: 6,67 A, 800 watts
Filtre
HEPA
8. Brosse à poils d'animaux
9. Brosse à épousseter
10. Court boyau souple
11. Jeu du filtre HEPA
12. Brosse à plancher
13. Levier tapis-plancher
14. Tubes de rallonge (x2)
15. Long boyau souple
18
ORDERING REPLACEMENT DUST CUP FILTERS
TO ORDER REPLACEMENT FILTERS
Model EP037
Call: 1 (800) 798-7398
Monday to Friday 8:30 A.M. - 5:00 P.M.
Eastern Standard Time
FOR TECHNICAL SUPPORT
Model EP037
Call: 1 (800) 798-7398
Monday to Friday 8:30 A.M. - 5:00 P.M.
Eastern Standard Time
visit our website: www.sharkvac.com
PLEASE NOTE: After each Use - Always remove the Filter Debris Screen from the
HEPA Dust Cup Filter, then vigorously "TapClean" HEPA Filter until no more dust
can be removed. Filter should be rinsed and completely dried at least once a
month or when suction appears reduced.
To wash your HEPA Dust Cup Filter, hold filter cartridge by frame flange and rinse
under a tap until all observable dirt has been removed. Some discoloration of the
HEPA filter material may occur, this is normal and will not affect the filter's
performance. When finished, shake off excess water. DO NOT wash in
dishwasher.
It is important that when you wash the HEPA dust cup filter, you allow it to dry
COMPLETELY before using again. We recommend 24 hours to air dry. DO NOT
DRY IN DRYER.
or
7