Orbegozo SFA 8000 Manual De Instrucciones página 11

SFA 8000
3. Put the motor on the top of mast and fix it screwing the screws to the mast. Mount rear grill on
motor screwing it. Place the blade in motor shaft and ensure it with the screw.
4. For assembling water nebulizer, it is necessary to put on frontal grill and fix to it with supplied
screws.
5. Place the front grill in front of rear grill and assure it with the flanges of the frame. Connect the
tubes of nebulizer to connection of the mast.
OPERATING INSTRUCTIONS
• Step 1: Set the fan base on a level and stable surface.
• Step 2: Please make sure the fan switch is in OFF position and Speed knob is in the 0 position. Plug cord
into any standard AC outlet.
• Step 3: The speed is adjusted by moving the knob left or right to the desired setting (0-Off; 1-Low; 2-
Medium; 3-High)
• Step 4: if you want to active nebulizer put the nebulizer in ON position and turn the water regulator to
set the nebulizer level.
• Step 5: To connect swing function, unscrew the screw on bottom of motor and change of position as
below pictures show.
11