HQ-Power VDPLOP1209RGB Manual Del Usuario página 7

•
In case of the 4-channel mode, you will have to set the start address of the first unit to 1 (CH1~4), the
second to 5 (1 + 4) (CH5~8), the third to 9 (5 + 4) (CH9~12), and so on. The highest start address is 509.
•
In case of the 5-channel mode, you will have to set the start address of the first unit to 1 (CH1~5), the
second to 6 (1 + 5) (CH6~10), the third to 11 (6 + 5) (CH11~15), and so on. The highest start address
is 508.
•
In case of the 9-channel mode, you will have to set the start address of the first unit to 1 (CH1~9), the
second to 10 (1 + 9) (CH10~18), the third to 19 (10 + 9) (CH19~27), and so on. The highest start address
is 504.
To set the device to work with a DMX controller:
1. Press <MENU> until <PERS> is displayed and press <ENTER>.
2. Use <UP> and <DOWN> to select the 3, 4, 5 or 9 channel DMX mode and press <ENTER>.
3. Press <MENU> until <Addr> is displayed and press <ENTER>.
4. Use <UP> and <DOWN> to set the DMX starting address (d--1 ~ d512) and press <ENTER>.
DMX Channel Values
3-channel mode
Channel From
1 0
2 0
3 0
4-channel mode
Channel From
1 0
2 0
3 0
4 0
5-channel mode
Channel From
1 0
2 0
3 0
4 0
9 channel mode:
Channel From
1 0
2 0
3 0
4 0
0
11
201
206
211
216
5 221
226
231
236
241
246
251
V. 04 – 08/01/2013
VDPLOP1209RGB
To Description
255 Red 0 ~ 100 %
255 Green 0 ~ 100 %
255 Blue 0 ~ 100 %
To Description
255 Dimmer 0 ~ 100 %
255 Red 0 ~ 100 %
255 Green 0 ~ 100 %
255 Blue 0 ~ 100 %
To Description
255 Dimmer 0 ~ 100 %
255 Red 0 ~ 100 %
255 Green 0 ~ 100 %
255 Blue 0 ~ 100 %
To Description
255 Dimmer 0 ~ 100 %
255 Red 0 ~ 100 %
255 Green 0 ~ 100 %
255 Blue 0 ~ 100 %
10 No function
200 Colour macros
205 White 1: 3200 K
210 White 2: 3400 K
215 White 3: 4200 K
220 White 4: 4900 K
225 White 5: 5600 K
230 White 6: 5900 K
235 White 7: 6500 K
240 White 8: 7200 K
245 White 9: 8000 K
250 White 10: 8500 K
255 White 11: 10000 K
7 ©Velleman nv