ROLODEX ELECTRONICS RF-128 Manual Del Usuario página 27

Accessing Data When the Password is
Activated
1. After turning the unit on when the password
is activated, press
or (
Memo
You are prompted to enter your password. Type
your password and then press ENTER.
If you mistype your password, the message
"OPEN ERROR!" will appear and you will be
prompted to enter your password again.
After you enter your correct password, the
icon will disappear from the screen and you will
be able to enter your data.
2. You can now enter new data or view existing
data.
Using a Password
).
PASSWORD?
[ ]
( ), (
Bus
26
), (
Per Sched
),