Accessories And Options; Anti-Tip Wheels - MINOS PLENA Manual De Usuario

ACCESSORIES AND OPTIONS

Quick-release axle
Press the quick-release button and insert the axle
fully into the hole until it is correctly in position. To
remove the wheel, press the quick-release button
and pull the wheel outwards.
To adjust the axle, fasten the lower end of the axle with a spanner
and use another spanner to adjust the self-locking nut to the desired
position.

Anti-tip wheels

These wheels are optional, but they are recommended
to prevent the chair from tipping over backwards.
To fit them, insert the anti-tip tube into the rear of
the frame tube. The distance between the wheel and
the ground is adjusted using a clamp system. To remove
the anti-tip wheels, remove the clamp.
Stepping pad
The lower part of the rear of the chair has a stopper.
To fit the tread, remove the stopper and insert the
tread in the tread axle. To fasten the position of the
tread once the holes in the frame and in the tread
axle are in line, attach these parts together using a
nut and bolt.
The tread can also be fitted using a clamp, with no need for tools.
Small wheels for lifts
At the bottom of the rear of the frame, there
is a hole. Insert the lift wheel fork axle in the
hole and fasten the bolt.
the seat upholstery and replace it with the adjustable seat.
Replace the bolts, position the crossbar on the supports and tighten
the hook and loop fasteners without deforming the crossbar seat
Replacing fixed upholstery with adjustable
upholstery
Remove the side armrests. Unscrew the two bolts
at the top of the backrest rear and remove the
standard upholstery. Remove the bolts that fasten
25