Connections - Panasonic SC-AKX640 Manual Del Propietário

Connections

Connect the AC power supply cord only after all the other connections have been made.
1
Connect the AM loop antenna.
Stand the antenna up on its base until it clicks.
2
Connect the FM indoor antenna.
Put the antenna where there is the best reception.
Adhesive tape
(not supplied)
3
Connect the speakers.
Connect the speaker cables to the corresponding
terminals.
4
Connect the AC power supply cord.
To household
AC outlet
Do not use any other AC power supply cords except
the supplied one.
Conserving power
The system consumes a small amount of power even
when it is in standby mode. Disconnect the power
cord if you do not use the system.
Some settings will be lost after you disconnect the
system. You have to reset them.
5