Getting Started; Making The Connections; Preparing The Remote Control - Panasonic SC-GT07 Instrucciones De Funcionamiento

Getting started

Making the connections

1
Prepare the setting stand.
2
Install the unit on the setting stand.
Align and put the unit on the setting stand, turn the
screw clockwise to secure the unit.
4
4
3
Connect the AC mains lead.
For the United Kingdom and Kuwait
READ THE CAUTION FOR AC MAINS LEAD
ON PAGE 3 BEFORE CONNECTION.
The system consumes approximately 0.2 W when it
is in standby mode.
Do not use an AC mains lead from other equipment.
Note:
• Do not sit on top of the unit.
• Some settings return to default when you disconnect
the system.
• These speakers do not have magnetic shielding. Do
not put them near TVs, PCs or other equipment easily
influenced by magnetism.
• Do not remove the speaker nets.
• Hold the unit firmly when moving it. Do not hold the
setting stand.

Preparing the remote control

Before using
Remove the insulation sheet.
Replacing the battery
Replace with a new battery (CR2025 lithium battery).
1
While pressing the stopper, pull out the
battery holder.
2
To household
Insert a new battery with the (+) side facing
mains socket
up.
3
Push the battery holder back fully.
CR2025