Care And Cleaning; Technical Data - Beper BC.351H Manual De Instrucciones

Deep Fryer Use instructions
SUGGESTIONS
Regularly change oil or fat. Do never add new oil/fat to oil/fat already used.
The oil/fat damages its properties when used for solong. Bread, for example, may dirt the oil.
Do not keep the oil of fat at high temperature for so long, this will make it lose its properties. It is recommended
to change completely oil frequently.
It is recommended not to keep oil into the fryer container for long periods.
Often clean the fryer with absorbing paper.

CARE AND CLEANING

Before cleaning the fryer unplug the cord from the socket an wait until oil is completely cooled to prevent from
burns.
Empty the oil from the non-stick container ; remove residue with a sponge or absorbing paper of kitchen.
Pour some hot water and wash liquid into the container and let work for 30 minutes ; wash the container with
spatula used for non-stick surfaces or a soft sponge. Empty the tank and rinse it carefully with water.
Wash the basket with hot water and wash liquid.
Wash the body and the lid with a soft and wet cloth.
Well dry all the parts.
Do not use abrasive sponge in order to protect the fryer container.
Do never immerge the fryer into water or put it under water flow.

TECHNICAL DATA

Power 840W
Power supply 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
13
EN