Intended Use; Description; Scope Of Delivery; Technical Design - SATA trueSun Instrucciones De Servicio

Operating Instructions SATA trueSun
EN
■ Keep the vent slots on the charger free.
Operating parameters
■ Only operate the LED lamp, battery and charger within the parameters
stated on the nameplate.
Cleaning
■ Never use solvents or agents containing solvents to clean the LED
lamp, battery or charger. Always use SATA wet and dry cleaners (Art.
No. 75358) for cleaning.

3. Intended Use

The LED light is used to simulate sunlight when illuminating surfaces for
spraying.

4. Description

The LED lamp is used to illuminate resprayed surfaces. The simulated
sunlight of the LED lamp reveals tiniest differences in the sprayed sur-
face.

5. Scope of Delivery

■ LED lamp
■ Lithium ion battery
■ Charger
■ Operating Instructions
After unpacking, check:
■ LED lamp, lithium ion batter or charger damaged
■ Scope of supply complete (see chapter 5)

6. Technical Design

6.1. LED lamp
[1-1] Impact protection for
protective screen
[1-2]
Fully variable dimmer with
detent function (concealed)
[1-3] Pull-off tab protective film
[1-4] Button
[1-5] Protective screen with
protective film
[1-6]
Battery release

7. Technical Data

72
[1-7] Battery
[1-8] Battery charging slot
[1-9]
Power plug UK
[1-10] Power plug US
[1-11] Power plug EN
[1-12] LED 1
[1-13] LED 2
[1-14] Bat.Info button