Anti-Spinning Button; Over-Load Protection - InMotion SCV V10 Serie Manual De Usuario

4

4.2. Anti-spinning Button

Due to the unique algorithm of the V10, if the body angle varies after the unicycle body lifts off the ground under normal
startup state, it will lead to motor spinning acceleration until the unicycle shuts down. If being placed on the ground during
motor acceleration, the unicycle will be likely to fly off due to the friction between wheels and ground, and there will be a
risk of running into others in some cases, such as elevators, stairs, getting on or off the bus, or crowded places.
The anti-spinning button below the body handle is designed for the V10 according to its characteristics. When the user
holds the handle to lift up the unicycle, the key will be automatically triggered, and the unicycle will enter the sleep state.
In the meantime, the motor will no longer rotate to avoid spinning accordingly. Remove your hands from the handle key to
let the unicycle fall to the ground again. The unicycle will return to normal condition for continual use.
The anti-spinning function is activated by default when V10 leaves the factory. You can disable this function through the
mobile APP, although it is preferably to turn it on.

4.3. Over-load Protection

INMOTION SCV V10 restricts the maximum driving speed and maximum load to avoid the dangers caused by driving too
fast. When the power of the unicycle comes close to the maximum power set by the system, the pedal will slightly tilt up
for 3~25º accompanied by alarm sound. Users must slow down at this time.
Product Function Introduction
39