Scope Of Delivery; Instructions For Assembly - Hailo ProfiLOT Instrucciones De Uso Y Manejo

4. Scope of delivery

1 x Combination ladder (3-section or 2-section))
1 x Crossbar
1 x Use and Operating Instructions
Check that the contents are complete and check
for any possible transport damage before use.
Remove the packaging material.
Packaging material is not a children's toy;
there is a risk of suffocation if not handled
properly.

5. Instructions for assembly

Installing the crossbar:
1. Lay the combination ladder down. Unlock the front
ladder element [A-2] and the single ladder [G] at
the locking hook [D], raise slightly and move one
rung backwards. The foot pedal [A-3] is now readily
accessible. The crossbar [B] can now be removed.
Then lock the locking hooks on the ladder rungs
(see 6.3 Adjustment and locking mechanism with
locking hooks)
2. First unscrew a foot [B-1] and a stop screw [B-2]
on the crossbar [B] (Phillips screwdriver required).
3. Open foot pedal [A-3] and insert crossbar [B]
as shown.
4. Screw foot [B-1] and stop screw [B-2] on tightly
again onto the crossbar.
Pay attention to the correct installation position!
5. Align crossbar and close foot pedal.
6. For multi-purpose ladders with swivel base, the
crossbar is installed in the same order. Check the
correct installation position!
The combination ladder must only be used
with the crossbar installed.
26
2.
1.
4.
3.
5.
6.