Declaration Of Conformity; General Information - Hailo TA950HF Instrucciones De Uso

USE AND MAINTENANCE MANUAL
1 DESCRIPTION
• 9475-632 (TA950HF) mobile scaffolding – EN 1004-3-3.1/3.1 XXXD scaffolding.
• The 9475-632 (TA950HF) mobile scaffolding has been manufactured in compliance with
EN 1004 technical standards.
• Load class for uniform distributed loads: Class 3 (2.0 kN/m
• Maximum allowed height of 9475-632 (TA950HF) working platform:
3.1 m for indoor and outdoor use

2 DECLARATION OF CONFORMITY

Gierre Srl, with headquarters at 1 and 6 Via I Maggio, Olginate (Lecco)
That the mobile scaffolding named "MOBILE SCAFFOLDING" product code 9475-632
(TA950HF):
• Has been manufactured in compliance with EN 1004 technical standards (December 2004
edition).
• Has been manufactured in compliance with Italian Decree-Law n° 81/2008 (consolidated
act on health and safety at the workplace).
• Has been manufactured in compliance with the related prototypes that have passed load and
stiffness testing – as outlined in annexes A and B of EN 1004 technical standards – performed by:
That all samples manufactured bear an identification mark and are accompanied by an
instruction manual drafted in accordance with EN 1298 and EN 1004 technical standards.

3 GENERAL INFORMATION

3.1 ACCESS TO THE WORKING PLATFORMS
The working platforms may only be accessed from the inside of the scaffolding by means of the
trapdoor on the platform and using the vertical rung-type ladder corresponding to the beams
of the lateral framework of the structure.
3.2 CLASS AND MAXIMUM LOAD
The MOBILE SCAFFOLDING 9475-632 (TA950HF) mobile scaffolding is assigned Class 3 load
class – 2.0 kN/m 2
working platform is thus 168 kg in all permitted configurations. The sum of loads applied to each
working platform must in any case be no greater than the maximum load allowed.
TUV
- in accordance with EN 1004 standards. Maximum load capacity of the
DECLARES:
Italia S.r.l.
2
2
).