Troubleshooting; Technical Data; Disposal; Battery Disposal - ProfiCare PC-LB 3077 Manual De Instrucciones

Problem
The appliance is not func-
tioning.
The appliance is turned
on, but no mist is being
generated.
Too little mist is coming out of
the nozzle.
A bad smell is developing.
The appliance is abnormally
loud.
The symbol flashes in the
display and 3 signals sound.

Technical Data

Model:..................................................................PC-LB 3077
Power supply:.....................................220 - 240 V~, 50 - 60 Hz
Power consumption: .......................................................25 W
Protection class: ...................................................................
Capacity: ...........................................................approx. 5 litre
Net weight: ..................................................... approx. 1.47 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This appliance has been tested according to all relevant
current CE guidelines, such as electromagnetic compatibility
and low voltage directives, and is manufactured according
to the latest safety regulations.

Disposal

Battery Disposal

As a consumer you are obliged by law to return
old batteries / accumulators.
Remove the battery from the remote control
before disposing of the appliance.
Return the battery to a collection facility for the
collection of old batteries or hazardous waste.
Contact your local authority for more information.
PC-LB3077_IM

Troubleshooting

Possible Cause
The appliance has no power
supply.
The appliance is faulty.
The tank is empty.
The float gauge in the bottom right
of the water vessel is jammed.
Too much water in the vessel.
The ultrasound probe is soiled.
The ceramic filter is soiled.
The water is dirty.
Setting too low.
Water too cold.
The appliance is new.
The water is too old or soiled.
The appliance is unstable.
The tank is almost empty.
The water tank is empty.
Remedy
Check the socket with another appliance.
Plug in the mains plug correctly.
Check the main circuit breaker.
Contact our service centre or a specialist.
Fill the tank.
Check the float gauge in the water vessel. It must
slightly move up and down.
Remove some water and then tighten the tank cap
again.
Clean the ultrasound probe as described above.
Clean the filter as described above.
Replace the water.
Press the MIST LEVEL button to change the setting.
Add some warm water.
Remove the tank, take off the lid. Allow the appliance
to air in a cool place for 12 hours.
Replace the water and clean the appliance.
Check the stand space.
Refill the tank.
Pour in water as described in chapter "Preparation"
"Filling with Water".

Meaning of the "Dustbin" Symbol

Protect our environment: do not dispose of
electrical equipment in the domestic waste.
Please return any electrical equipment that
you will no longer use to the collection points
provided for their disposal.
This helps avoid the potential effects of incorrect disposal
on the environment and human health.
This will contribute to the recycling and other forms of
re-utilisation of electrical and electronic equipment.
Information concerning where the equipment can be
disposed of can be obtained from your local authority.
45
26.09.19