Intended Use; Stopping The Machine - Oregon LM300 Manual De Instrucciones

USING THE SAFETY KEY : (FIG. I)
The Safety Key is an important safety device on the machine . The motor and blades of the
machine can only be started when the Safety Key is inserted and rotated to the ON position .
Only insert the safety key when you intend to start the machine and turn the blades .
To insert the Safety Key, push the safety key into the socket, by aligning the small tab on the
key to the slot in the socket (Fig I) .
To turn the machine to the "ON" position rotate the key clockwise so the small indicator arrow
on the key points to the "I" .
To turn the machine to the "OFF" position, and to remove the key, rotate the key counterclockwise
so the small indicator arrow on the key points to the "O" . You may remove the key .
The motor can be started only when the Safety key is fitted .
Push the fuse key 16 into the socket . Then rotate the fuse key 16 to the position "on" . (Fig I)
REPLACING OR SHARPENING THE CUTTING BLADE: : (FIG. L)
Always remove the battery and the safety key when performing any maintenance .
The cutting blade is designed to be a replacement item and may need sharpening from time
to time . Sharpen when dull . Replace when damaged . Contact your dealer or the manufacturer
for proper instructions .
OPERATION : (FIG.J)
First, make sure you are in the proper cutting area . Ensure the cutting area is free of bystanders
and foreign objects . Inspect the machine for any possible damage or unsafe conditions .
Ensure the cutting height of the machine is at your desired height .
Ensure the safety is in the "ON" position . (Fig I)
Press and hold the safety button 20, squeeze the switch lever 19 towards the handlebar . (Fig
J)
When the unit starts, release the safety button 20 . Maintain squeezing the switch lever during
use .
Releasing the switch lever will disengage power to the unit . The blades may continue to rotate
for a period of time after power is disengaged .

INTENDED USE

The garden product is intended for domestic lawn mowing .

STOPPING THE MACHINE:

Release the switch lever 19. (Fig J). Releasing the switch lever will disengage power to the
unit . The blades may continue to rotate for a period of time after power is disengaged .
16
Assembly
Oregon® Lawnmower Model LM300