Safety Regulations - Corghi BL 600 M Manual De Uso

The equipment is intended for professional use only.
WARNING
Only one operator may work on the equipment at a time.
WARNING
Failure to observe these instructions and the relative danger warnings can
cause serious injury to the operator and others. Do not power up the machine
before you have read and understood all the danger/warning/attention notices
in this manual.
This machine must be used only by qualifi ed and authorised personnel. A qualifi ed
operator is construed as a person who has read and understood the manufacturer's
instructions, is suitably trained, and is conversant with safety and adjustment proce-
dures to be adhered to during operations. Operators are expressly forbidden from us-
ing the machine under the infl uence of alcohol or drugs capable of affecting physical
and mental capacity.
The following conditions are essential:
- The operator must be able to read and understand all the information in this manual.
- Make sure you have a thorough knowledge of the capabilities and characteristics of
this machine.
- Keep unauthorised persons well clear of the area of operations.
- Make sure that the machine has been installed in compliance with established legis-
lation and standards.
- Make sure that all machine operators are suitable trained, that they are capable of using
the machine correctly and that they are adequately supervised during their work.
- Never leave nuts, bolts, tools or other equipment on the machine to avoid the risk
that they could become entrapped between moving parts during work.
- Do not touch power lines or the inside of electric motors or other electrical equipment
until the power has been disconnected and locked out.
- Read this manual carefully and learn how to use the machine correctly and safely.
- Always keep this user manual in a place where it can be readily consulted when
working with the machine and consult it whenever you are in need of confi rmation or
explanations.
WARNING
Do not remove or deface the safety Danger, Warning or Instruction decals. Re-
place any missing or illegible Danger, Warning or Instruction decals. Missing or
damaged decals can be obtained at your nearest CORGHI dealer.
- When using and carrying out maintenance on the machine observe the unifi ed in-
dustrial accident prevention regulations for high voltage industrial equipment.
- Any unauthorised alterations made to the machine automatically release the manu-
facturer from any liability in the case of damage or accidents attributable to such
alterations. Specifi cally, tampering with or removing the machine's safety devices is a
breach of the regulations for industrial accident prevention.
Operator's manual BL 600

SAFETY REGULATIONS

GB
25