Assembly Method - Melchioni Family VEGA XL Manual De Uso

ASSEMBLY METHOD

1. Before the juice cup is installed, please confirm whether the rubber pad of the marc outlet at the bottom of the
juice cup is properly installed.
a. Make the rubber pad of marc outlet inserted into the rectangular slot.
b. Make the rubber pad of marc outlet properly inserted.
Notes: The rubber pad must be properly installed, otherwise leakage phenomenon may occur.
2. Cover for Installation juice outlet
The cover of the juice outlet is separately packed during the packaging process. Before use, make the bayonet of the
cover of juice outlet align with the fixed column on the juice outlet and inserted.
3. Cover for Installation marc outlet
The cover of the marc outlet is separately packed during the packaging process. Before use, make the aligning column
on the fixing piece of the cover of marc outlet align with the fixing groove on the outlet and inserted.
4. Assembly of complete machine
Rubber pad
Step 6
Make the juice cup and marc cup is respectively installed to outlet.
Step 6
Step 5
Make the inlet tube installed to the squeezing cup. See the figure,
make the mark
squeezing cup aligned and perform installation downwards, and then
rotate it at clockwise direction.
Step 5
Step 4
Make the filter installed into the squeezing cup. See the figure. Make
the mark
squeezing cup aligned and perform installation downwards.
Step 4
Step 3
Make the auger installed into the filter. Make the hexagonal axis in
the spiral propeller align with the outer hexagonal axis of motor and
perform installation downwards, and then rotate it at clockwise
direction.
Step 3
Step 2
Make the filter installed into the washing rack.
Step 1
Step 2
Make the squeezing cup installed tontohe main body. See the figure.
Make the trim strip on the squeezing cup align with the trim strip on
the main body and perform installation downwards, and then rotate
it at clockwise direction.
Step 1
on the inlet tube and the mark
on the juicing filter and the mark
The figures are only for assembly, and there may be difference
with the real object, and it shall be based on the real object
12
on the
on the