Cleaning Method; Circuit Diagram; Troubleshooting - Melchioni Family VEGA XL Manual De Uso

CLEANING METHOD

1. Wash the disassembled parts with flowing water;
if the meshes are blocked up by dreg,
please use the cleaning brush for the cleaning.
Notes:
1. Please do not use iron wire brush
Abradant or sharp cleaning
tools for cleaning
2. Do not make the mainframe put into water for cleaning; and be sure to use wringed soft cloth to clean it.
3. After cleaning, please dry the cleaned parts and store them in a clean and ventilating place.
Notes:
1. Please wash the machine in time after use, otherwise the dreg will attach to the container, which will affect
the assembly and cleaning, and even result in perfor mance reduction.
2. The rubber pad at the bottom of the squeezing cup may be washed.

CIRCUIT DIAGRAM

TROUBLESHOOTING

PHENOMENON
The running machine stops
suddenly
The juice amount is small
or juice flows out of the
mainframe
Brown
Yellow/Green
Blue
CAUSE
1. Whether the power plug is inserted
properly
2. The quantity of materials put into the
machine is too much
3. Hard fruits and vegetables are not cut
1. Materials stored in refrigerator are
too long
2. The rubber pad at the bottom of
squeezing cup is not installed properly
Switch Motor
PCB Board
Microswitch
1. Make the plug inserted into the socket.
2. Firstly, press "R" for 2-3s to make the
materials return upwards; then press the
"ON" button (repeat the process for about 3
times). If the machine still does not run
please clean the machine and then use it.
3. Hard fruits and vegetables (such as carrot)
shall be squeezed after being cut into strips.
1. The juice amount will be increased if the
materials are squeezed after being immersed
in clear water for sufficient water absorption.
2. Please reinstall the squeezing rubber pad
by referring to the installation method.
3. Use fresh fruit.
16
TROUBLESHOOTING METHOD