Disassembly Method; Cleaning And Maintenance - Melchioni Family VEGA XL Manual De Uso

6. There will be certain friction noise when carrot (hard flesh) or apple(hard peel) is used for squeezing, but this has
no impact on the product.
7. Juice will be splash from the feed inlet when such materials as cherries tomatoes and grapes are used for squeezing.
when use soft fruit to make juice, please mix some apple or pear together, it will be better to get more juice and
marc will go out more smoothly.
Notes: This juicer continuous working max time is 20 mins, please cool down the juicer for about 10 mins and
restart it.

DISASSEMBLY METHOD

1. Stop the machine and pull out the plug.
2. Grip the cover of juice cup by hands, and rotate the cup of juice cup (see figure 1. at counter clockwise direction
to the position indicated on figure 2. and then take out the cover of inlet tube upwards.
1
2
3. Grip the juice outlet on the squeezing cup, and take it upwards for separation (see figure 3 ).
4. Take out the auger + filter + washing rack from squeezing cup (see figure 4).
5. Respectively disassemble auger, fiter and washing rack (see figure 5 ).
3 5
4

CLEANING AND MAINTENANCE

1. Cleaning before use
1- After the complete machine is assembled, make the cover of juice outlet and the cover of marc outlet respectively
installed to the juice outlet and marc outlet of the squeezing cup, and it shall be at closed status.
2- Connect the power. Add 500 ml water into the squeezing cup from the feed port; switch on the machine will
perform about 30 seconds.
Cover of marc outlet Cover of marc outlet
is at closed status is at open status
2. Cleaning after use
Clean the disassembled parts with clear water, and please clean them with brush if meshes are blocked by marc.
Notes: Please do not use iron wire brush abradant or sharp cleaning tools for cleaning..
15