Before Use; Cautions Regarding Handling - JB Systems DSP-6 Manual De Instrucciones

ENGLISH
Thank you for buying this JB Systems product. To take full advantage of all
possibilities, please read these operating instructions very carefully.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the
current European and national guidelines. Conformity has been established and the
relevant statements and documents have been deposited by the manufacturer.
• 6 channel Dimmer + Switch pack
• Max load 10A per channel with automatic 10A circuit breakers
• DMX and analog 0/10V inputs
• Block or individual channel addressing (soft patch)
• Overall or individual channel switch/dimmer mode (linear or square curve)
• Overall or individual channel presets 0-100% (no control panel needed)
• Overall or individual channel preheats 0-50%
• DMX-failure: auto DMX-hold, auto analog 0/10V or auto built-in patterns
• Phase Correction for linear dimming curves
• LCD display with channel output indications
• 3-Phase and single phase 230Vac 50~60Hz inputs
• Power failure memory

BEFORE USE

Check the contents:
Check that the carton contains the following items:
• DSP6 dimmer/switch pack
• Operating instructions
Some important instructions:
• Before you start using this unit, please check if there's no transportation damage.
Should there be any, do not use the device and consult your dealer first.
• Important: This device left our factory in perfect condition and well packaged. It is
absolutely necessary for the user to strictly follow the safety instructions and
warnings in this user manual. Any damage caused by mishandling is not subject to
warranty. The dealer will not accept responsibility for any resulting defects or
problems caused by disregarding this user manual.
• Keep this booklet in a safe place for future consultation. If you sell the fixture, be
sure to add this user manual.
JB SYSTEMS®
OPERATION MANUAL
1/46 DSP6
ENGLISH
• To protect the environment, please try to recycle the packing material as much as
possible.

CAUTIONS REGARDING HANDLING

CAUTION: To reduce the risk of electric shock,
CAUTION
do not remove the top cover. No user-
serviceable parts inside. Refer servicing to
qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is
intended to alert the use or the presence of un-insulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the
user to the presence of important operation and maintenance (servicing)
instructions in the literature accompanying this appliance.
• To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
• To avoid condensation to be formed inside, allow the unit to adapt to the surrounding
temperatures when bringing it into a warm room after transport. Condense
sometimes prevents the unit from working at full performance or may even cause
damages.
• This unit is for indoor use only.
• Don't place metal objects or spill liquid inside the unit. Electric shock or malfunction
may result. If a foreign object enters the unit, immediately disconnect the mains
power.
• Don't cover any ventilation openings as this may result in overheating.
• Prevent use in dusty environments and clean the unit regularly.
• Keep the unit away from children.
• Inexperienced persons should not operate this device.
• Maximum save ambient temperature is 45°C. Don't use this unit at higher ambient
temperatures.
• Always unplug the unit when it is not used for a longer time or before you start
servicing.
• The electrical installation should be carried out by qualified personal only, according
to the regulations for electrical and mechanical safety in your country.
• Check that the available voltage is not higher than the one stated on the rear panel
of the unit.
• The power cord should always be in perfect condition: switch the unit immediately off
when the power cord is squashed or damaged.
• Never let the power-cord come into contact with other cables!
• This appliance must be earthed to in order comply with safety regulations.
• Don't connect the unit to any dimmer pack.
• In order to prevent electric shock, do not open the cover. Apart from mains fuse
there are no user serviceable parts inside.
• Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with
a fuse of the same type and electrical specifications!
• In the event of serious operating problems, stop using the appliance and contact
your dealer immediately.
JB SYSTEMS®
OPERATION MANUAL
2/46 DSP6