Ibiza sound Standup212 Manual De Instrucciones página 5

TO PLAY MP3/WMA MUSIC
1. Switch power source to ON.
2. Insert a USB stick or an SD card
3. Press the USB/SD button
4. Select a title via the  or  buttons and press►
1 or 2
5. Select Player
TO PLAY LINE IN MUSIC
1. Insert an RCA plug into the LINE1 or LINE2 IN or CD socket to each channel
2. Select Line1/2 (12) on channel A/B and adjust volume (13)
USE OF WIRED MICROPHONE
1. Insert a wired microphone into the MIC INPUT (5)
2. Adjust volume with MIC button (6)
USE OF A DJ MIC
1. Connect the supplied gooseneck mic to the DJ MIC socket (3)
2. Adjust volume with DJ MIC button (4)
USE OF THE VHF MICS
1. Switch on the VHF microphone via the switch on the mic body. The box will automatically detect the
wireless microphone and the status LED will light up 2. Adjust volume via the VHF MIC button (9)
BLUETOOTH FUNCTION
1. Press the PLAY/PAUSE button 3-5 seconds until the led flashes red and blue in alternation. (At this moment the
device can be paired)
2. Switch on your Bluetooth device and activate the Bluetooth connect function
3. Select "IBIZA-PORT" in the list of found devices and connect.
4. Select Bluetooth in channel C (12) and adjust volume (13) 5. You are ready to play your music
USE OF THE CUE FUNCTION
1. Select the source you want to hear (MIC/A/B/C) with CUE selector (10)
2. Adjust headphone volume with Phones vol button (8)
PANEL OF STANDUP212
1. USB/SD MP3/WMA Player1
USB/SD
Long press to decrease the volume of the module / short press to skip
VOL- /
Long press to increase the volume of the module / short press to skip
VOL + /
■
2. USB/SD MP3/WMA Player2 (ditto 1)
3. DJ microphone input
4. DJ microphone volume
5. Wired MIC input
6. MIC VOLUME
7. Monitor headphone output
(12) on channel A/B and adjust volume (13)
Choose USB / SD
back to previous track
to the next track
Play/Pause
Stop
©Copyright LOTRONIC 2014 5