Operating Instructions; Connect Clario To Mains Power - Medela Clario Instrucciones De Uso

7 Operating instructions

CAUTIONS
The Clario is to be set up in such a way, that a separation from the mains supply can
be easily managed� Calibrate the rechargeable battery before the first use�
WARNINGS
For use only by medically trained persons who have been adequately trained in suction
procedures and in the use of aspirators� Wear gloves for all operations�
7.1
Connect Clario to
mains power
1� Check the pump before use following the instruction in
chapter 6�1�
2� All models: if the pump is
connected to a fixed
mains socket:
or
AC/DC version: if the
pump is operated with a
12 VDC power source:
or
AC/DC version: if the
pump is operated with the
rechargeable battery:
Plug in the mains plug of
the power cord to a fixed
mains socket�
Connect the optional
12 VDC connection cable
to the pump and to the
12 VDC power source�
No connection to a power
source is needed� Make
sure that the battery was
charged for five hours�
| 15
Operating instructions