GOAL ZERO YETI 3000 LITHIUM Guia Del Usuario página 50

SETTINGS
NAME CHANGE
Give your Yeti a new name by clicking
on "My Yeti". This is helpful if you
have multiple power stations synced
to your device.
UPDATE
Download and Install the latest
Yeti firmware.
SAY GOODBYE
Tap the trash can icon to delete connected
power stations.
13
MODIFY YETI SETTINGS
Tap the Yeti name to adjust settings
and check for firmware updates.
ADD ANOTHER YETI
Tap here to sync more power
stations to your device, or to connect
to a different WiFi network.
TROUBLESHOOTING
1. I'm getting a "Yeti Not Found" error when searching for the Yeti.
Touch the BACK button and reconnect your device to the power station.
2. One of the Port Status is red instead of green.
A red port status will display when port has experienced an overload, if this
occurs turn port off and back on.
3. How do I swap between Anywhere Connect and Direct Connect?
From the Manage Yeti control screen, touch the green bar above the charge
level section. You'll need a reliable WiFi network to use Anywhere Connect.
Refer to page 9 for setting up Anywhere Connect.
4. What's the question mark on all the screens?
This is the help icon. If you're stuck at any point during setup, tap the help
icon for assistance.
14