GOAL ZERO YETI 3000 LITHIUM Guia Del Usuario página 9

two layers of conversion (12V to high voltage, DC to AC). The least efficient way of using
the battery in the Goal Zero Yeti is to use an AC-DC adapter off the AC ports, as is the
case if you use a phone wall charger to charge your phone, as it adds yet another layer of
conversion in the wall adapter.
So when you're deciding on what to power from your new GOAL ZERO recharger, do
some research into your device's watt consumption. For more quick tips and learning
tools, check out www.GoalZero.com/learn.html
14
Troubleshooting
If you are having trouble with WiFi connection:
1. Press and hold the WiFi button for approximately 3 seconds to force the Yeti into
connection mode. The WiFi symbol on the screen will begin to flash.
2. Reconnect your device to your Yeti following the instructions in the Goal Zero Yeti App,
If your devices are not recharging from your Goal Zero Yeti, follow these steps:
1. Ensure the Output Port has been turned on. The green LED light on the power button
should be lit up.
a. If any of the lights have turned red, this indicates a trip. Push the button again to reset
it. The light will turn green when it is successfully reset.
2. Check the Battery Display. If it is at 20% or below, charge your Goal Zero Yeti.
3. Check the LCD Display for warning icons:
OVERLOAD: Power draw exceeds port's maximum allowance. Indicated by red light in
the port's button.
Temperature warning.
Allow unit to cool.
4. Verify your device is suitable for use with the Goal Zero Yeti:
a. All of the Goal Zero Yeti output ports have their own max power capacity. Check the
Goal Zero Yeti's Tech Specs to ensure your device is compatible.
5. If you are still experiencing trouble with your Goal Zero Yeti, please call our Customer
Solutions Center at 1-888-794-6250 or by email at support@goalzero.com.
Battery requires attention.
Contact customer support.
1-888-794-6250
15