Swivel Seat Function; Foot Brake Function; Parking Brake Function For The Front Wheels; Adjustment Of The Seat Tilt - Thomashilfen A chassis Advantage Manual Del Usuario

User manual – A chassis Advantage

Swivel seat function

NOTE REGARDING SAFETY: Each time that the seat is modified, ensure that the seat unit is properly and securely
locked before placing your child into the rehab stroller.
Secure the chassis from rolling away using the parking brake (Fig. 10). Actuate the release lever on the back of the
EASyS Advantage / EASyS Advantage S / EASyS Modular S seat unit and pull the seat unit upwards out of the chassis
(Fig. 1). Make sure that the buttons on the sides of the seat unit between the folding joint and the connecting strap of
the rear frame and the sliding support are properly threaded through (Fig. 2) and that the release lever remains actuated
while removing the seat unit.
Now the seat unit can be placed facing the rear. Activate the release lever on the backrest and insert the seat unit into
the chassis from above (Fig. 1). Make sure that the buttons on the sides of the seat unit between the folding joint and the
connecting strap of the rear frame and the sliding support are properly threaded through (Fig. 2) and that the release le-
ver remains actuated while removing the seat unit. Now guide the buttons on the sides of the seat unit into the receiving
slots on the sides of the chassis (Fig. 3) and let the seat unit slide into position (Fig. 4). When you release the trigger, the
seat unit engages into the closest position of the hole matrix.
CAUTION: Always ensure that the locking pins on both sides of the seat unit engage firmly into a hole in the hole matrix.

Foot brake function

Activation: Place your foot on the brake lever and push it down (Fig. 10).
Release: Place your foot under the brake lever and push it up (Fig. 10).

Parking brake function for the front wheels

Activation: Position the front wheel so that it is straight and allow the braking pin to engage (makes an audible "click").
Release: Pull the braking pin out and fasten it by rotating it 90° (Fig. 12).

Adjustment of the seat tilt

CAUTION: When adjusting the seat tilt, always hold the back of the rehab stroller to avoid jerky changes in position
for the child. We recommend that you make these adjustments without the child in the seat unit. When making adjust-
ments with the child in the seat, the child must always be held / secured by a second person.
Actuate the release lever on the back of the seat unit and swivel the seat to the desired seat tilt (Fig. 1). When you let go
of the release lever, the seat unit engages into the closest hole in the hole matrix.
CAUTION: Always ensure that the locking pins on both sides of the seat unit are engaged firmly in place in a hole in
the hole matrix.
CAUTION: During day-to-day use, ensure that the release lever always remains unobstructed and is not accidentally
triggered / pulled (due to counterpressure / contact with other objects). Otherwise, there is an increased risk of tilting /
injury for the child.
NOTE: In the "Crash" version of the A chassis Advantage, an additional locking pin for limiting the active sitting position
(-10°) is mounted on the side. It is indicated by a "0°" label (Fig. 17)
This locking pin prevents the active sitting position from being set unintentionally. If the active seating position is to be
used, the pin must be pulled out during tilting. If the seat is moved out of the active seating position, the pin automati-
cally reinserts itself again.
19