1. Notes on this manual
Read this manual carefully in its entirety. It contains important information
on the installation and operation of the PIKO Data Communicator.
KOSTAL Solar Electric GmbH assumes no liability for damages arising
from the non-observance of this manual. This manual is an integral part of
the product. It applies exclusively to the PIKO Data Communicator from
KOSTAL Solar Electric GmbH.
2. Proper use
The PIKO Data Communicator displays a solar system's data in a digital
picture frame.
The device may only be used under the permitted ambient conditions.
Inappropriate use may result in damage to the device. The PIKO Data
Communicator may only be used for its intended purpose.
Any use that differs from or goes beyond the stated intended purpose is
considered inappropriate. The manufacturer accepts no liability for any
damage resulting from this. Modifi cations to the PIKO Data Communicator
are prohibited.
Exclusion of liability
All names, trademarks, product names or other designations given in this
manual may be legally protected even if this is not labelled as such (e.g.as
a trademark). KOSTAL Solar Electric GmbH assumes no liability for their
free usage. The illustrations and texts have been compiled with great care.
However, the possibility of errors cannot be ruled out. The compilation is
made without any guarantee.
Any instance of misuse of the PIKO Data Communicator will result in termi-
nation of the warranty, guarantee and general liability of the manufacturer.
18
Perfect operation cannot be guaranteed with all digital
picture frames.
Important information: You will fi nd a list of
compatible digital picture frames in the download
area of the KOSTAL Solar Electric GmbH website
(http://www.kostal-solar-electric.com).