Electrical Safety - DeWalt DCR006 Traducido De Las Instrucciones Originales

ENGLISH
INTENDED USE
The D WALT Bluetooth
E
signal from a mobile phone or other device with Bluetooth
functionality for audio playback.
DO NOT use under wet conditions or in the presence of flammable
liquids or gases.
DO NOT let children come into contact with the unit. Supervision is
required when inexperienced operators use this unit.
• Young children and the infirm. This appliance is not intended for
use by young children or infirm persons without supervision.
• This product is not intended for use by persons (including children)
suffering from diminished physical, sensory or mental abilities; lack
of experience, knowledge or skills unless they are supervised by
a person responsible for their safety. Children should never be left
alone with this product.

Electrical Safety

Always check that the battery pack voltage corresponds to the voltage
on the rating plate.
WARNING: Risk of electric shock. Use in dry locations only.
ASSEMBLY AND ADJUSTMENTS
Inserting a Battery Pack (fi g. 1, 2)
WARNING: Use only D
NOTE: Make sure your battery pack is fully charged. If the battery pack
does not produce sufficient power, charge the battery pack following the
instructions in the manual of the charger.
NOTE: To ensure maximum performance and life of Li-Ion batteries,
charge the battery for a minimum of 10 hours before first use.
1. Align the battery pack (j) with the rails on the sides of the battery
port (g).
2. Insert the battery pack (j) into the port until it is fully seated.
60
®
speaker is designed to receive a Bluetooth
WALT battery packs and chargers.
E
®
®
audio