Technical Specifications - Cardin Elettronica PRG303 Instrucciones De Uso

ENGLISH
Before commencing with the installation of this appliance make sure that you have read the fol-
lowing instructions carefully. In particular familiarise yourself with the safety devices required by
the system, only then will you be able to use them to great effect.
Not all of the safety devices required by the local safety standards have been taken into con-
sideration in this manual. The installer must make sure that any eventual safety devices required
by the local standards and regulations have been installed both ahead of and after the products
described in this manual.
This appliance must be used exclusively for the purpose for which it has been made. Any non
authorised modifications are to be considered improper and therefore dangerous. The manufacturer
accepts no liability for damage caused by, or situations arising from, the improper use of these
appliances and therefore all work carried out after the delivery of the appliance is to be considered
the complete responsibility of the installer.
These instructions are aimed at professionally qualified "installers of electrical equipment" in
conformity with the local standards and regulations in force.

Technical specifications

Power supply
Frequency
Overall power consumption
Nominal current input
Minimum power cable cross section
Motors
Maximum motor power consumption
Operating temperature
Inputs
Powers supply binding posts 230 Vac 50-60 Hz
Earth binding post
Antenna binding post
Dynamic button input NO
Blocking button input NC
Opening travel limit contact NC
Closing travel limit contact NC
Inverting photocells contact NC
Outputs
Power output for 1 motor 350W
Indicator lamp output 24 Vdc 3W
Flashing warning lights output 230 Vac 80W
Output powering external devices 24 Vac 3W
Work time
Maximum programmable time
Pause time
Maximum programmable time
REMARKS
seconds
seconds
8
ENGLISH
Vac
Hz 50-60
W
Amp
mm
2
Nr.
W
°C -20...+55
300
300
230
400
2
1
1
350