Ninja BL490EU Manual De Usuario página 29

CARE & CLEANING:
MAINTENANCE
CAUTION: MAKE SURE THAT THE MOTOR
BASE IS UNPLUGGED FROM THE POWER
SOURCE BEFORE INSERTING OR REMOVING
ANY ATTACHMENT AND BEFORE
CLEANING.
CAUTION: DO NOT IMMERSE THE MOTOR
BASE INTO WATER OR ANY OTHER LIQUID.
CAUTION: HANDLE BLADES CAREFULLY AS
THE BLADES ARE VERY SHARP.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and wipe
dry.
3 Place the cups, lids, blade assemblies, and bowl
in the top rack of the dishwasher.
4 Carefully hand wash the cups, lids, blade
assemblies, and bowl in warm, soapy water with
a soft cloth.
STORING:
1 Store the Nutri Ninja with Auto-iQ
System upright. Secure the power cord on the
back of the base by wrapping the cord around
the cord wrap. Do not place anything on top
of the unit. Store the cups and the rest of the
attachments where they will not be damaged and
won't cause a hazard.
OR
®
RESETTING THE MOTOR THERMOSTAT:
Pro Compact The Nutri Ninja with Auto-iQ Pro Compact System
®
features a safety system that prevents damage to the
unit's motor and drive system should you inadvertently
overload the appliance. If the appliance is overloaded,
the motor will stop. To reset the appliance, follow the
resetting procedure below:
1
2
3
4
5
Unplug the appliance from the electrical outlet.
Remove and empty the cup/pitcher/bowl and
ensure that no food is jamming the cutting blades.
Allow the appliance to cool for approximately 30
minutes.
Re-install the cup/pitcher/bowl onto the motor
base and re-plug the appliance into the electrical
outlet.
Proceed with using the appliance as before
while making sure not to exceed the maximum
recommended capacities.
2 9