Craftsman 316.292710 Manual Del Operador página 20

Engine Type ................................................................. Air-Cooled, 4-Cycle
Displacement ................................................................. 1.6 cu. in. (26.2 cc)
Idle Speed RPM ................................................................. 3,000-3,600 rpm
Operating RPM ................................................................. 7,200-8,800 rpm
Clutch Type ......................................................................... Centrifugal
Ignition Type ......................................................................... Electronic
On/Off Stop Control ................................................................ Rocker Switch
Valve clearance (intake and exhaust) ................................. 0.003-0.006 in. (0.076-0.0152 mm)
Spark Plug Gap ............................................................ 0.025 inch (0.655 mm)
Lubrication .......................................................................... SAE 30 Oil
Crankcase Oil Capacity ............................................................ 3.04 oz (90 ml)
Fuel ................................................................................ Unleaded
Carburetor ................................................................ Diaphragm, All-Position
Starter ........................................................... Incredi-Pull
TM
Starting Auto Rewind
Muffler ....................................................................... Baffled with Guard
Throttle .......................................................................... Spring Return
Fuel Tank Capacity ................................................................. 15 oz (444 ml)
Cultivating Path Width (Maximum) ................................................ 9 inches (22.86 cm)
Cultivating Depth (Maximum) .................................................... 6 inches (15.24 cm)
Approximate Weight (no fuel) ........................................................ 25 lb. (11.5 kg)
*All specifications are based on the latest product information available at the time of printing. We reserve the right to
make changes at any time without notice.
20