IM_Sin-Dentas.D-GB-F-I-E:IM_Sinus_Dentasonic
Use
Open the lid of the device. Insert the basket supplied into the
stainless steel tank. Place the item to be cleaned in the middle of
the basket to achieve the best cleaning result.
Then fill the tank with water.
If the tank overflows, wipe the outside of the device dry imme-
diately. The liquid must cover the item to be cleaned, but should
never come above the maximum filling depth marking.
Attention: Cleaning without water might cause damage to the
ultrasonic cleaner.
Close the lid and plug in the device.
The appliance is working with closed lid only.
Now press the ON switch to start the cleaning process.
The blue operating light on the inner cover comes on to indicate
the operating mode.
During cleaning, a slight vibration noise can be heard as the
cleaning process is carried out in the liquid tank.
After 5 minutes, the cleaning process finishes automatically and
the blue light goes off. If you want to cut the cleaning process
short, please press the OFF switch.
16
24.10.2006
10:00 Uhr
Seite 23
Regular addition of usual cleaning agents for dental prosthesis
(pills or powder) will help avoiding bacteria formation.
Repeating the cleaning process will make the cleaning effect
more powerful.
However, we recommend that you let the appliance cool down
for at least 5 minutes between cleaning processes.
After cleaning has finished, switch the device off (unplug from
mains), open the lid and remove the cleaned object from the
device.
In order to avoid the formation of lime scale, empty the water
out of the cleaning tank. The little tank can hereto be detached
by pushing down the unlock button at the front side of the devi-
ce and pulling the tank off the base. After cleaning, wipe out the
tank with with a piece of cloth or our professional microfibre
cloth (made by Vileda).
basket inside. Otherwise, the object to be cleaned or the stainless
steel tank surface might be scratched.
Important: Never use the ultrasonic cleaner without the
17