Problems And Remedies; Disposal; Conformity - Carrera Sinus Dentasonic Instrucciones De Servicio

IM_Sin-Dentas.D-GB-F-I-E:IM_Sinus_Dentasonic

Problems and Remedies

Problem/fault Possible cause(s)
The device is The device is not
plugged in plugged in or not
but is not properly plugged in.
working.
No power supply.
The mains cord is
faulty.
The item to be Device not switched
cleaned is still on.
dirty.
There is no water, or
not enough water in
the tank.
No cleaning product
added.
20
24.10.2006 10:00 Uhr
Remedy
Insert the plug firmly in the
socket.
If necessary, have the 230 V
socket into which the
device is plugged or the
installation checked by an
electrician.
Send the device to the
Service Center (for address,
see page 23).
Press the "ON" button on
the device.
Add water to the tank
until it reaches the "MAX"
mark.
Add a cleaning product
depending on type of dirt.
Seite 27

Disposal

Do not dispose of the appliance via your domestic
refuse. Please contact your local administration for
environmentally compatible appliance disposal
("electronic waste").

Conformity

In accordance with the following EU Directives the
appliance is permitted to bear the CE symbol:
73/23/EWG Low Voltage Directive
89/336/EWG EMV Directive
The distributor is in receipt of the declaration of conformity:
Lutter & Partner GmbH
Lilienthalallee 35
80939 München
Germany
21