Frs Base Station Operation; Powering The Base Station On / Off; Adjusting The Speaker Volume; Channel Selection - TruTalk TK514 Instrucciones De Operación

FRS BASE STATION OPERATION

Powering the Base Station ON -
Press and HOLD the power button for two
seconds. A tone will indicate the unit is ON;
the LCD will display settings saved from
your last radio use.
Powering the Base Station OFF -
Press and HOLD the power button again for
two seconds. A tone will sound and the LCD
panel will go dim. The radio will automatically
save the current function settings.
Adjusting the Speaker Volume - With the radio on, press the VOLUME
UP (I) button to increase volume; press the VOLUME DOWN (J) button
to decrease volume. The volume indicator icon (number 1 - 8) will change
according to your setting. Hold the VOLUME UP (I) or DOWN (J) button
to scroll through settings. A double beep will sound when the volume reaches
the highest (8) and lowest (1) settings.
Channel Selection - Press and release the CHANNEL UP (I) or DOWN
(J) button to reach the desired setting. Hold the CHANNEL UP (I) or
DOWN (J) button to scroll through the channels.
"PrivateTalk" Sub-channel Selection - Press and release the
FUNC button until the small numbers next to the channel number display
flash on the LCD. Select the PrivateTalk sub-channel (01 - 38) by a press
and release of the CHANNEL UP (I) or DOWN (J) buttons* until the
desired PrivateTalk sub-channel is displayed. To select that sub-channel,
press and release the P-T-T button. If your beep tone indicator is active, a
tone will confirm your selection. A PrivateTalk sub-channel setting of (00)
deactivates the PrivateTalk feature and allows ALL radio conversations
on that channel to be heard.
If no PrivateTalk sub-channel selection is made after 10 seconds, the radio
will save the last change and return to operational mode.
7