Industry Canada Notice; Fcc Rf Exposure Requirements - TruTalk TK514 Instrucciones De Operación

FCC INFORMATION, Continued
Industry Canada Notice: Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause
undesired operation of the device.

FCC RF EXPOSURE REQUIREMENTS

WARNING - This radio complies with the Federal Communications
Commission (FCC) RF Exposure limits for general population /
uncontrolled exposure environment. In addition, it complies with
the following Standards and Guidelines:
o FCC-96-326, Guidelines for Evaluating the Environmental Effects of
Radio-Frequency Radiation.
o FCC OET Bulletin 65 Edition 97-01 (1997) Supplement C, Evaluating
Compliance with FCC Guidelines for Human Exposure to Radio
Frequency Electromagnetic Fields.
o ANSI / IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect
to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz
to 300 GHz
o ANSI / IEEE C95.3-1992, IEEE Recommended Practice for the
Measurement of Potentially Hazardous Electro-magnetic Fields - RF and
Microwave.
•
When transmitting, keep the antenna at least 8 inches (20 cm) away
from your head and body.
•
The radio must be used with a maximum operating duty cycle not
exceeding 50%, in typical P-T-T (push-to-talk) configurations. DO NOT
transmit more than 50% of total radio use time (50% duty cycle).
Transmitting more than 50% of the time can cause FCC RF exposure
compliance requirements to be exceeded. The radio is transmitting
when the "TX" icon is displayed on the LCD panel. You can cause the
radio to transmit by pressing the P-T-T button or when the radio is set to
the VOX (voice activated) mode.
•
Unauthorized accessories, antennas, modifications, or attachments may
damage the transmitter and may violate the FCC Rules and Regulations.
2