Descargar Imprimir esta página

Sending A Call Tone; Receiving A Call - TruTalk TK514 Instrucciones De Operación

Publicidad

Idiomas disponibles

Idiomas disponibles

FRS BASE STATION OPERATION, Continued
Transmitting a Message, Continued
Note: If you have difficulty transmitting in a high-noise environment in VOX
mode, press the P-T-T button while you speak - without moving the VOX
switch to the P-T-T position. The radio's P-T-T will override the VOX mode
and transmit. Remain within 18 to 36 inches from the microphone for best
performance.
Sending a Call Tone - You can send an audible tone to alert another radio
user when you are getting ready to transmit, or to help identify yourself.
You can also use the call tone to signal the beginning of your transmission.
Simply press and hold the CALL button for approximately 1 second, then
release. The LCD will show the telephone handset (call tone indicator). The
tone will be transmitted to others on your current channel setting.
Talk Confirmation Tone Indicator - When activated, a tone signal is
automatically sent to the receiving radio after your transmitted message,
to confirm that you are finished with your message transmission.
To temporarily eliminate the talk confirmation tone, press the FUNC button
until the music note icon
is flashing. Press the CHANNEL UP (I) or
DOWN (J) button to toggle on or off. Either press the P-T-T button to
store your settings OR make NO keypresses for 10 seconds; your radio
will automatically store your settings and return to its standard operational
mode.
Receiving a Call - When powered, the TK514 is continuously in the
receiving (RX) mode. When a call is rceived on the current channel, the
RX indicator icon will flash in the LCD panel. If you notice the RX indicator
on, and you do not hear any conversations through the radio speaker, the
incoming signal may be weak or your PrivateTalk sub-channel is filtering
out unwanted transmissions. To "open" the channel to hear weak signals,
press and hold the monitor (MON) button. To hear all conversations on the
channel, set your PrivateTalk sub-channel to "00" for that particular channel.
9

Publicidad

loading

Productos relacionados para TruTalk TK514