Elite VC0850P Manual De Usuario página 22

2. Place filter retainer into the top of the cartridge filter, hold the power head with one hand, turn the handle
on the filter retainer clockwise to tighten, locking the filter into place.
3. To remove the cartridge filter for cleaning, again hold the power head and turn the filter retainer coun-
ter-clockwise to loosen and remove, slide the cartridge filter off the filter cage.
4. To clean the cartridge filter shake or brush off excess dirt or rinse(from the inside of the filter) with water,
dry completely (approximately 24 hours) and re-install.
NOTE: If the filter has been used for wet pick up, it must b cleaned and dried before using for dry pick up.
5. Slide collar of filter bag into retainer guides.
6. When secured in place, expand bag and position around the inside of the tank.
7. This wet/dry vac is equipped with a dust-full indicator(Part 3) which will be lighted when the tank is filled
with dust or the filter is clogged with dust. When this hanppens, turn off vac, unplug the power cord, and
empty the dust tank or clean the filters.
NOTE:The dust-full indicator might be lighted when the wet/dry vac is used for wet pickup. No action requi-
red.
7
www.ELITETOOLS.co
Keep Working