Cleaning & Maintenance; Maintenance And Cleaning - Lacor HOME Instrucciones De Uso

11.- Use of adapter and vacuum canisters;
a.- Put the product into the canister and fit the lid correctly.
b.- Connect the supply wire to the electricity supply.
c.- Put the end of the adapter into the suction nozzle located inside the machine. To
vacuum using the adapter, the lid does not have to be closed.
d.- Place the other end on the centre of the canister lid.
e.- Press the "Vacuum & Seal" button and press the adapter placed on the lid.
f.- When the vacuum process has ended, this function's light will turn off.
g.- Take out the end of the adapter placed in the suction nozzle.
h.- To open a vacuumed canister, turn the control on the lid clockwise.
While the air is being extracted from the canister, you will hear noises or crunching due
to the tension caused on its sides. Don't worry. It's normal.
1.- Before proceeding to clean the appliance, make sure it is unplugged.
2.- Avoid cleaning the appliance using aggressive or chlorinated products. Never put the
appliance into water. Just use a damp cloth for cleaning the exterior and interior parts. Never
use brushes or steel wools for cleaning.
3.- Dry the appliance after cleaning it and make sure you store it in a dry, well-ventilated place.
4.- The vacuum-packing machine requires no maintenance, but if, through time, you notice that
the vacuum pads, the Teflon strip, the rubber seal or other elements have deteriorated, order
an original spare part from the manufacturer.
List of available spare parts:
Ref. R69050A Teflon strip
Ref. R69050B Sealing resistance
Ref. R69050C Upper vacuum foam
Ref. R69050D Lower vacuum foam
Ref. R69050E Sealing rubber tube
Ref. R69050F Adapter for canisters
Ref. R69050G Canister lid
CLEANING & MAINTENANCE
N.B
22