Epson TM-T88V-DT Manual Del Usuario página 12

English
LED Indicators
The main body also has 3 LED indicators (Disk access LED, Status LED (orange),
and Status LED (green)). Each LED indicator on the control panel and main body
indicates the following: See Illustration A.
LED
Power (A 10)
Error (A 10)
Paper (A 10)
Paper (A 10)
Disk access (A 3)
Status (A 4 , A 5)
*Excluding during paper feed using the Feed button, a self-test, and an error state)
Feed button
This feeds the paper.
Connecting External Devices and the AC Adapter
Removing the Connector Cover
CAUTION:
Be sure to push the lower part of both sides of the connector cover inward
when attaching/removing it, or the connector cover may become damaged.
To connect external devices, first remove the connector cover (A 9), following the
steps below:
Push the connector cover down while pushing the lower part of the both sides of it
inward to detach the hooks from the printer case. See Illustration C.
Connecting External Devices and the AC Adapter
CAUTION:
Be sure to use the specified AC adapter [AC adapter,T (Model: M284A)].
Connection to an improper power source may cause fire or shock.
Note:
The green identification tape on the cable of the AC adapter is for distinguishing the AC
adapter,T from another AC adapter in connection with another product. The tape has no
meaning for the TM-T88V-DT.
6 TM-T88V-DT User's Manual
Color and status
On in green
Off
On in orange
Flashing in orange
Off
On in orange
Flashing in orange
Off
On in green
Green
On
On
Flashing (with approx.
1 s intervals)
Off
On
Orange
Flashing (with approx.
1 s intervals)
Off
Off
Off
Flashing (with approx.
160 ms intervals)
Meaning
Power is on.
Power is off.
Offline.*
An error has occurred.
In normal operation.
Roll paper near-end.
Waiting for self-test
printing to be continued
or in macro execution
ready state.
Paper is adequate.
Access to SATA interface.
Booting.
in normal operation.
Standby.
Power is off.
CPU is high in
temperature.