Know Your Mower - Sandrigarden GI3000 Manual De Instrucciones

UK

1) KNOW YOUR MOWER

Read all of this manual carefully,
observing all the recommended safety
instructions before, during and after
using your mower, and maintain your
mower in good working order.
Familiarise yourself with the controls
on your mower before attempting to
operate it, but above all, be sure you
know how to stop your mower in an
emergency.
Retain this user manual and all other
literature supplied with your mower for
future reference.
2) SAFETY INSTRUCTIONS
TRAINING
• Never allow children or persons who
are unfamiliar with this type of mower
to use it, nor anyone who has not read
this user manual.
Do not allow children, animals or
other persons near your mower
when in use - always keep them at
least 6m (20ft) away from the
cutting area.
• Remember that the operator is
responsible for accidents or hazards
occurring to other people or their
property.
• Your mower is designed for use on AC
(mains) electrical supplies only - do not
attempt to use it on any other supply.
• Use a power cable H05 RN-F or H05 VV-
F or greater, with minimum cross section
of 2x1.5 mm2 and max length of 20 m.
• Plug your mower into a power point -
never a lighting socket.
• Never carry your mower by the cable
8/
023
INSTRUCTION MANUAL
or jerk the cable to seperate the
connectors. Keep the cable away from
heat sources, oils or sharp edges.
Check the condition of your cable
before use and do not use if damaged.
PREPARATION
• To protect your feet, always wear stout
shoes or boots - freshly cut grass is
damp and slippery.
• Rubber or man-made footwear will
enhance your safety.
• Do not operate your mower barefoot or
in open sandals.
• Use protective equipment. Wear safety
spectacles or goggles whilst operating
your mower. Use ear protection if the
sound level seems uncomfortable
when using your mower.
• Use a face mask if dusty.
• Wear long trousers to protect your legs
- any debris left on the lawn or cutting
path may be picked up and ejected by
the blade.
• The power supply cable should be
regularly inspected for signs of damage
or ageing, and only used if in good
condition.
• Always keep the power supply cable
away from the blades - be aware of its
position at all times.
• Always be sure your mower is in a safe
operating condition.
Before using your mower, disconnect
it from the electrical supply and visually
check that the blade, blade nut and
cutter assembly are not worn or
damaged. A damaged blade or worn
blade nut is a major hazard and must
be replaced. Also check that the blade
nut is securely fastened.