Basic Functions; Switching On And Off; Simple Weighing; Weighing With Tare - KERN KMN-TM Manual De Instrucciones

3 Basic functions

3.1 Switching on and off

Switching on
➜ Press
.
The display lights up and then shows the software number.
When the weight display appears, the weighing terminal is ready for operation.
Switching off
➜ Press and hold
3.2 Zeroing
Zeroing corrects the influence of slight soiling on the load plate.
Setting to zero manually
1. Unload weighing platform.
2. Press .
The zero display appears.
Automatic zeroing
In case of non-certified weighing platforms, the automatic zero point correction can be
deactivated in the supervisor menu (F1.4.1).
As standard, the zero point of the weighing platform is automatically corrected when the
weighing platform is unloaded.

3.3 Simple weighing

1. Place weighing sample on the weighing platform.
2. Wait until the motion indicator goes out.
3. Read weighing result.

3.4 Weighing with tare

Taring
➜ Place the empty container on the weighing platform and press
The zero display and the Net indicator appear.
until –OFF– is displayed.
9
.