KERN KMN-TM Manual De Instrucciones página 15

4.5 Counting
For this purpose, F2.1=Count must be set in the operator menu.
When the weighing terminal is used predominantly for counting operations, KERN & Sohn
recommends to stick the delivered label (Count, APW, PCS) over the left 3 indicators (Under,
OK, Over).
Determining piece weight and counting
1. Press to activate the counting function.
The Count and PCS indicators light.
2. Press and hold
3. Press repeatedly until the desired piece number (5, 10, 20, 50) for the
determination of the piece weight appears.
4. Put the displayed number of pieces on the weighing platform and confirm with
The number of pieces is displayed and the PCS indicator lights.
5. Put additional pieces on the weighing platform.
The current piece number is displayed.
Switching between number of pieces and weight
Using the key, you can switch between the following values:
until PCS ... appears.
• Display of the number of pieces.
The PCS indicator lights.
• Display of the piece weight.
The APW indicator lights.
• Display of the total weight.
None of the 3 indicators for counting is
lighting.
14
.